Expand / Collapse Navigation
 |
secbase error exporting certificates and keys, secbase export_cert: Configuration access error |
 Feb 19 2010, 06:19 AM
Post
#1
|
|
|
Visitor  Group: Members Posts: 1 Joined: 18-February 10 Member No.: 1,060  |
Hi!
When attempting to export the certificates (and same for the keys) from the GW 6.8.5 (SP9) we get the following error: secbase export_cert: Configuration access error We had the same error some time ago and at that time we managed to solve it BUT we dit not document that solution and now we have the same situation again and we cannot find the solution this time.  Memory is getting clear now! We set the user access control to "none" the last time got it working. Tried it this time also with the same instance of GW and no luck...  Can anyone give some input on what to test, we have made a copy of the installation so any command is pretty much possible. As we remember last time we changed some setting in the gatesetup to get it working. All other exports are fine, itīs just the certificates and keys that fail with this error. What functions is the secbase dependant on? What canNOT be shut down to have it working? Any input would be great, thanks in advance! //Jonas |
 |
 
|
|
Feb 22 2010, 08:41 AM
Post
#2
|
|
 Visitor Group: Members Posts: 7 Joined: 28-November 08 Member No.: 223 |
QUOTE (JoLu @ Feb 19 2010, 07:19 AM)  Hi! When attempting to export the certificates (and same for the keys) from the GW 6.8.5 (SP9) we get the following error: secbase export_cert: Configuration access error We had the same error some time ago and at that time we managed to solve it BUT we dit not document that solution and now we have the same situation again and we cannot find the solution this time. Memory is getting clear now! We set the user access control to "none" the last time got it working. Tried it this time also with the same instance of GW and no luck... Can anyone give some input on what to test, we have made a copy of the installation so any command is pretty much possible. As we remember last time we changed some setting in the gatesetup to get it working. All other exports are fine, itīs just the certificates and keys that fail with this error. What functions is the secbase dependant on? What canNOT be shut down to have it working? Any input would be great, thanks in advance! //Jonas Hi, To use security method on Gateway, you must set SSL/TLS to yes for one or more protocol in gatesetup. regards, |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 30th July 2010 - 01:06 PM |
Skin designed by IPB Forum Skins